Replacement Spin-Spray Pump

The Replacement Spin-Spray Pump sits inside of the RV Evaporative Air Cooler and is attached to the impeller and pushes the water through the filter. Eventually things will need to be replaced from normal wear and tear. A good sign that your pump needs replacing is inadequate cooling.

If your pump cone tip happens to be submerged in water. If the water depth is lower than 3/4", you can attempt to adjust the pump. Also the polarity may need to be reversed.

To replace pump:
Mark shaft where the pump is located.
Loosen set screw on pump and slide pump off shaft.
This is the time to pull the air impeller off the motor shaft if it
is to be replaced.
Now slide pump back on shaft to mark, and set screw to flat side of shaft and tighten set screw.
The bottom of the pump cone should clear bottom of circular water tray by 1/4” (6mm).

Features:

• 90 Day warranty
• Easy installation
• Easy replacement
• Quick installation

Specifications:

• From bottom of impeller to the tip of the cone: 7 7/8"
• Need 1/4" clearance between tip of pump cone and bottom of water tray

Need Assistance?
If you have questions, need help, or simply feel uncomfortable placing your order online, feel free to contact the product representative at 1-800-786-0329 or send a Support Ticket.