If you are having a problem setting the light display on your SKU# 11-1297 Christmas lights, follow the instructions below.

1. Turn panel over on it's face so no light can get to it.

2.Turn on/off switch to off and auto/ manual switch to auto.

3. Turn on/off switch to on.

4. Unit will take 10 seconds to turn on and when it does it will cycle through 10 different lighting setting ( blinking, tracer, constant ect) at 10 second intervals.

5. After light cycles through 10 settings it will go off for 10 seconds then start the cycles over again.

6. When desired lighting setting is reached turn auto/manual switch to manual setting.

7. Turn the panel back over in a lighted area so the lights stop illuminating.